Knapping before and after polishing: Technological evidence in the Neolithic polished stone tools from Hungary

Keywords: polished stone cutting edge tools; knapping; production technology; microcrystalline rocks; Neolithic; Hungary

Abstract


The authors present the evidence gathered during the interdisciplinary study of several polished stone tools from some Neolithic sites in Hungary. In particular, the cutting-edged tool production (axes, adzes, chisels) involves knapping at several stages of the operational-chain within an artefact’s ‘life cycle’ - from raw material procurement, its manufacture, use, and discard. Some specific fine-grained and non-siliceous raw materials, among which are mainly hornfels, “white stones” and a few greenstones, show evidence of being worked by knapping as shown by the recovery of rough-outs, flaked similarly to biface artefacts, reworked pieces during retooling attempts, and several flakes detached before and after polishing the artefact surfaces. These latter demonstrate that re-sharpening and re-working polished cutting-edged tools was a common practice within the settlements during the whole Neolithic period. These small flakes, that sometimes look like true bladelets, have been often confused with, and published as, chipped stone tools. Therefore, it is important to get a holistic view of the whole stone industry during the study of the lithic assemblages. As in the case for chert and flint in N Europe, which have been intensively exploited for the production of polished axes and adzes, some other lithic raw materials could be easily worked by knapping for the production of polished tools, especially micro-crystalline rocks that have technical response and physical properties very similar to true flint and chert. Moreover, there are indeed implications regarding social organization among Neolithic communities, not only from the point of view of raw material procurement. Notably, the technical capability of producing and maintaining in efficiency the polished stone tools had to be acquired by individuals belonging to each household within the community, since stone axe-adzes were polyfunctional tools for mundane and multiple tasks. Therefore, as an important means for survival, the production of stone tools, both chipped and polished, was a knowledge certainly transmitted from generation to generation, although we still have to understand the modes and social implications of the transfer in details.

Author Biographies

Elisabetta Starnini, University of Pisa

Department of Civilizations and forms of Knowledge
University of Pisa
Via dei Mille 19
56126 Pisa
Italy

György Szakmány, Eötvös Loránd University

Department of Petrology and Geochemistry
Eötvös Loránd University
Pázmány Péter sétány 1/c
H-1117 Budapest
Hungary

References

Adams, J., Delgado, S., Dubreuil, L., Hamon, C., Plisson, H. & Risch, R. 2009, Functional analysis of macro-lithic artefacts: A focus on working surfaces. In: Non-Flint Raw Material Use in Prehistory: Old prejudices and new directions / L’utilisation préhistorique de matières premières lithiques alternatives : Anciens préjugés, nouvelles perspectives, Session C77, (Sternke, F., Eigeland, L. & Costa, L.-J., Eds.), Proceedings of the XV World Congress of the International Union for Prehistoric and Protohistoric Sciences, Actes du XV Congrès Mondial de l’Union Internationale des Sciences Préhistoriques et Protohistoriques, Vol. 11, BAR International Series Vol. 1939, British Archaeological Reports, Oxford: p. 43-66.
Antonović, D. 1997, Use of Light White Stone in the Central Balkans Neolithic. Starinar, 48: 33-39.
Antonović, D. 2014, Manufacturing of Stone Axes and Adzes in Vinča Culture. In: Archaeotechnology: Studying technology from prehistory to the Middle Ages, (Vitezović, S. & Antonović, D., Eds.), Serbian Archaeological Society, Belgrade: p. 77-88.
Antonović, D., Resimić-Sarić, K. & Cvetković, V. 2005, Stone raw materials in the Vinča Culture: Petrographic analysis of assemblage from Vinča and Belovode. Starinar, 55: 53-66. doi:10.2298/sta0555053a
D’Amico, C. & Starnini, E. 2012, La production d’outils de pierre en Italie du Nord vue depuis l’atelier de Rivanazzano (Province de Pavie, Lombardie): matières premières et chaîne opératoire. In: Produire des haches au Néolithique: de la matière première à l’abandon, Actes de la table ronde de S. Germain- en-Laye (De Labriffe, P.-A. & Thirault, E., Eds.), Séances de la Société Préhistorique Française, Vol. 1, Société préhistorique française, Paris: p. 17-25. (in French) (“The production of stone implements in Northern Italy from the point of view of the Rivanazzano workshop (Pavia Province, Lombardy”): Raw materials and chaîne opératoire”) URL: http://www.prehistoire.org/offres/file_inline_src/515/515_P_29974_2.pdf
Inizan, M.L., Roche, H. & Tixier, J. 1992, Technology of Knapped Stone. Préhistoire de la Pierre Taillée. Vol. 3. Cercle de Recherches et Études Préhistoriques and Centre National de la Recherche Scientifique, Meudon, 127 p.
Kaczanowska, M. & Kozłowski, J. K. 1987, «Barbotino» (Starčevo-Körös) and Linear complex: Evolution or independent development of lithic industries? Arheološki Radovi i Rasprave, 10: 25-52.
Nougier, L.-R. & Romain, R. 1953, Le débitage par sciage dans le «Néolithique pyrénéen». Bulletin de la Société préhistorique française, 50 (1-2): 54-60. (in French) (“The débitage par sciage in the Pyrenees Neolithic”) doi:10.3406/bspf.1953.2994
Pétrequin, P., Cassen, S., Errera, M., Klassen, L., Sheridan, A. & Pétrequin, A.-M. (Eds.) 2012, Jade. Grandes Haches Alpines du Néolithique Européen. Ve et IVe Millénaires av. J.-C. Vol. JADE 1 & 2, Presses universitaires de Franche-Comté et Centre de recherche archéologique de la vallée de l'Ain, Besançon, 2261 p. (in French) (“Jade. Large Alpine Axes of the European Neolithic. 5th and 4th Millennium BC”)
Pétrequin, P., Gauthier, E. & Pétrequin, A.-M., (Eds.) 2017a, Jade. Objets-signes et interprétations sociales des jades alpins dans l'Europe néolithique. vol. 17, Dynamiques territoriales, 9 Vol. JADE 3 & 4. Presses universitaires de Franche-Comté et Centre de recherche archéologique de la vallée de l'Ain, Besançon, 1466 p. (in French) (“Jade. Symbolic objects and social interpretations of Alpine jades in Neolithic Europe“) URL: https://hal.archives-ouvertes.fr/hal-01516594
Pétrequin, P., Pétrequin, A.-M., Gauthier, E. & Sheridan, A. 2017b, Alpine Jades: From Scientific Analysis to Neolithic Know-How. In: The Exploitation of Raw Materials in Prehistory: Sourcing, Processing and Distribution (Pereira, T., Terradas, X. & Bicho, N., Eds.), Cambridge Scholars Publishing, Newcastle upon Tyne: p. 354-367.
Prinz, B. 1988, The Ground Stone Industry from Divostin. In: Divostin and Neolithic of Central Serbia, (McPherron, A. & Srejović, D., Eds.), Narodni muzej Kragujevac and Department of Anthropology, University of Pittsburgh, Pittsburgh and Kragujevac: p. 255-300.
Starnini, E. 1994, Typological and technological Analysis of the Körös Culture Chipped, Polished and Ground stone assemblages of Méhtelek-Nádas (N-E Hungary). Atti della Società per la Preistoria e Protostoria della regione Friuli Venezia-Giulia, 8: 29-96.
Starnini, E. 1996, The stone artefacts. In: Excavations at Bicske Galagonyás. Part III. The “Notenkopf” and Sopot-Bicske Cultural phases, (Makkay, J., Starnini, E. & Tulok, M., Eds.), Quaderni della Società per la Preistoria e Protostoria della Regione Friuli-Venezia Giulia, Trieste: p. 151-219.
Starnini, E. & Szakmány, Gy. 2000, The lithic industry of the Neolithic sites of Szarvas and Endrőd (south-east Hungary): Techno-typological and archaeometrical aspects. Acta Archaeologica Academiae Scientiarum Hungaricae, 50: 279-342.
Starnini, E., Szakmány, G. & Whittle, A. 2007, Polished, ground and other stone artefacts. In: The Early Neolithic on the Great Hungarian Plain: Investigations of the Körös culture site of Ecsegfalva 23, Co. Békés (Whittle, A., Ed.), Varia Archaelogica Hungarica (VAH), Budapest: p. 667-676.
Starnini, E., Szakmány, G., Józsa, S., Kasztovszky, Z., Szilágyi, V., Maróti, B., Voytek, B. & Horváth, F. 2015, Lithics from the Tell Site Hódmezővásárhely-Gorzsa (Southeast Hungary): Typology, Technology, Use and Raw Material Strategies during the Late Neolithic (Tisza Culture). In: Neolithic and Copper Age between the Carpathians and the Aegean Sea; Chronologies and Technologies from the 6th to the 4th Millennium BCE (Hansen, S., Raczky, P., Anders, A. & Reingruber, A., Eds.), Archäologie in Eurasien Vol. 31, Habelt Verlag, Bonn: p. 105-128.
Szakmány, G. 1994, Appendix 3, Thin section analysis of some rock samples from Méhtelek In: Typological and technological Analysis of the Körös Culture Chipped, Polished and Ground stone assemblages of Méhtelek-Nádas (N-E Hungary) (Starnini, E., Ed.). Atti della Società per la Preistoria e Protostoria della regione Friuli Venezia-Giulia, Vol. 8, Società per la Preistoria e Protostoria della regione Friuli Venezia-Giulia, Triestre: p. 93-94.
Szakmány, G., Józsa, S., Bendő, Z., Kasztovszky, Z. & Horváth, F. 2016, Magyarországon előkerült hornfels (mész-szilikát szaruszirt) anyagú csiszolt kőeszközök nyersanyaglelőhelyének felkutatása. Archeometriai Műhely, 13(1): 43-54. (in Hungarian) (“Discovering the provenance of hornfels polished stone tools in Hungary”) URL: http://www.ace.hu/am/2016_1/AM-2016-1-SzGy.pdf
Váczi, B., Szakmány, G., Starnini, E., Kasztovszky, Z., Bendő, Z., Nebiacolombo, F.A., Giustetto, R. & Compagnoni, R. 2019, Characterization of HP meta-ophiolite boulders and cobbles from northern Italy primary outcrops and secondary deposits, as possible raw material sources for the production of “greenstone” prehistoric tools: Petrographic investigation and archaeological assessment. European Journal of Mineralogy, 31(5-6): 905-917. doi:10.1127/ejm/2019/0031-2859
Published
15-Dec-2021
How to Cite
Starnini, E., & Szakmány, G. (2021). Knapping before and after polishing: Technological evidence in the Neolithic polished stone tools from Hungary. Journal of Lithic Studies, 8(2), 14 p. https://doi.org/10.2218/jls.6691